Toro 74770 - Stopping the Machine; Adjusting the Height of Cut; Adjusting the Anti-Scalp Rollers

Tow
Thisisthemediumspeed.Thesuggestedusesfor
thisspeedareasfollows:
•Bagging
•Mulching
Mow
Thisisthefastestspeed.Thesuggestedusesforthis
speedareasfollows:
•Normalmowing
•Transportingthemachine
StoppingtheMachine
Tostopthemachine,movethemotion-control
leverstoNEUTRALandoutwardtothePARKposition,
disengagetheblade-controlswitch,ensurethatthe
throttleisintheFASTposition,andturntheignition
keytoOFF.Removethekeyfromtheignitionswitch.
WARNING
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandmove
themotion-controlleversoutwardtothe
PARKpositionwhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeightofCut
Note:Thetransportpositionisthehighest
height-of-cutpositionat115mm(4-1/2inches)as
showninFigure23.
g027504
Figure23
AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheightofcut,adjustthe
heightoftheanti-scalprollers.
Note:Adjusttheanti-scalprollerssothattherollers
donottouchthegroundinnormal,atmowingareas.
1.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstothePARKposition,
andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Adjusttheanti-scalprollersasshowninFigure
24tomatchtheclosestheight-of-cutposition.
21