Toro GrandStand 74504 - Page 51

LevelingtheMowerDeckfromSideto
Side
1.Loosenthesidenutandjamnutintheyokesyouwant
toadjust(Figure78).
Figure78
1.Topbolt
4.Sidenut
2.Jamnut5.Adjusttheseyokesto
adjusttherightsideofthe
mowerdeck.
3.Yoke6.Adjusttheseyokesto
adjusttheleftsideofthe
mowerdeck.
2.Rotatethetopboltoftheyokestoadjusttheheightof
themowerdeck(Figure78).
Note:Rotatetheboltsclockwisetoraisethedeck;
rotatetheboltcounterclockwisetolowerit.
3.Tightenthejamnutsandsidebolts.
4.Checktheside-to-sideheight;refertoCheckingthe
MowerDeckSide-to-SideHeight(page50).
CheckingtheMowerDeckFront-to-Rear
Pitch
1.Adjustthetirepressureinthereartirestothecorrect
specications.
2.Position1bladefront-to-rear.MeasureatAandB
locationsfromalevelsurfacetothecuttingedgeof
thebladetips(Figure79).
Note:Themowerbladeshouldbe6mm(1/4inch)
lowerinfrontatAthanintherearatB.
3.Rotatethebladesandrepeatforotherblades.
Figure79
1.Measurethebladeat
pointsAandB
2.Measurefromalevel
surface
4.Ifthefront-to-rearpitchisnotcorrect,refertoLeveling
theMowerDeckfromFronttoRear(page52).
51