Toro GrandStand Series Setup Instructions

1
CheckingtheTirePressure
NoPartsRequired
Procedure
Pressure:83to97kPa(12to14psi)
Note:Thefrontcasterwheelisasemi-pneumatictireand
doesnotneedtobechecked.
Checktheairpressureinthedrivetires.
Figure1
2
PreparingtheGrassDeector
NoPartsRequired
Procedure
Installthespringforthegrassdeector;refertoReplacing
theGrassDeectorintheOperator’sManual.
3
CheckingtheEngine-OilLevel
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethemachine,check
theoillevelintheenginecrankcase;refertoServicingthe
Engine-OilLevelintheOperator'sManual.
4
AddingFueltotheMachine
NoPartsRequired
Procedure
Addfueltothemachinebeforestartingit.Refertoyour
Operator’sManualforthecorrectfuelandprocedure.
Note:Ensurethatthefuel-shutoffvalveisopenbefore
attemptingtostarttheengine.
5
CheckingtheHydraulic-Fluid
Level
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethemachine,check
thehydraulic-uidlevelinthetank;refertoCheckingthe
Hydraulic-FluidLevelintheOperator’sManual.
2

Toro GrandStand Series Specifications

General

Transmission	Hydrostatic
Warranty	3 years
Engine Type	Gasoline
Blade Tip Speed	18, 500+ ft/min (5, 639+ m/min)
Deck Type	Fabricated
Speed	10 mph