CHASSIS
3-92 Toro GrandStand Service Manual
3
92. Remove the four engine mounting bolts and Belle-
ville washers securing the engine to the engine base
(Fig. 0346).
Fig. 0346 DSCN-1126a
Engine Base Installation
1. Secure the engine base to the engine using four sets
of bolts and Belleville washers. Install the Belleville
washers with the crown facing the bolt head. Torque
to 200 ± 25 in-lbs. (22.6 + 2.8 Nm) (Fig. 0348).
Note: Support the engine base. The engine base will
be free once the four engine mounting bolts
and Belleville washers have been removed
(Fig. 0347).
Fig. 0347 DSCN-1136a
Fig. 0348 DSCN-1126a
Note: Apply thread-locking compound to the bolt
threads prior to installation (Fig. 0349).
Fig. 0349 DSCN-1138a
To Next Page
Loading...
