Toro GrandStand Series - Page 114

CHASSIS
3-93Toro GrandStand Service Manual
3
2. Install the square key in the crankshaft and apply
anti-seize around the crankshaft (Fig. 0350).
Fig. 0350 DSCN-1142a
3. Install the hydro drive pulley onto the engine crank-
shaft (Fig. 0351).
Note: Install the pulley with the long hub facing the
engine.
Fig. 0351 DSCN-1143a
4. Apply thread locking compound to clutch bolt
threads (Fig. 0352).
Fig. 0352 DSCN-1148a
5. Secure the electric clutch onto the engine crankshaft
using the clutch bolt, spring washer and washer
(Fig. 0353).
Fig. 0353 DSCN-1114a