Toro GrandStand Series - Page 116

CHASSIS
3-95Toro GrandStand Service Manual
3
10. 2010 only: Secure the thread forming screw using
the nut (Fig. 0358).
Fig. 0358 DSCN-1161a
11. Feed the clutch wires up through the engine base
and install the rubber grommet into the engine base
(Fig. 0359).
Fig. 0359 DSCN-1163a
12. 2010 only: Secure the clutch wires to the clutch
stop using a cable tie (Fig. 0360).
Fig. 0360 DSCN-1165a
13. Position the engine and engine base plate assembly
onto the mower deck (Fig. 0361).
Fig. 0361 DSCN-1166a