Toro GrandStand Series - Page 133

CHASSIS
3-112 Toro GrandStand Service Manual
3
79. Connect the wire harness to the neutral switch (Fig.
0422).
81. Connect the black wire eyelet and battery ground
cable to the engine block using a bolt and washer
(Fig. 0424).
Fig. 0422 DSCN-1421a
80. Connect the wire harness to the clutch harness (Fig.
0423).
Fig. 0423 DSCN-1423a
Fig. 0424 DSCN-1446a
82. Connect the green and blue wire bullet connectors to
the two small studs on the solenoid (Fig. 0425).
Fig. 0425 DSCN-1447a