CHASSIS
3-111Toro GrandStand Service Manual
3
75. Install the motion control cable adjustment nuts into
the linkage mount (Fig. 0418).
Fig. 0418 DSCN-1409a
76. Secure the motion control cables to the linkage
mount using the spring clip (Fig. 0419).
Fig. 0419 DSCN-1410a
78. Secure the rod ends at the base of the control
cables to the control forks using the bolts, spacers
and nuts (Fig. 0421).
77. Secure the speed control cable to the RH control
cable and the lower LH side of the linkage mount
using cable ties (Fig. 0420).
Fig. 0420 DSCN-1414a
Fig. 0421 DSCN-1416a
To Next Page
Loading...
