CHASSIS
3-114 Toro GrandStand Service Manual
3
86. Secure the red wire eyelet and battery positive cable
to the solenoid post using a nut and lock washer
(Fig. 0429).
Fig. 0429 DSCN-1456a
Note: Position the red boot over the solenoid post
after installing cables (Fig. 0430).
Fig. 0430 DSCN-1457a
87. 48” and 52” decks: Install the lift rod through the lift
rod bracket and secure with nut (Fig. 0431).
Fig. 0431 DSCN-1459a
88. 60” decks: Install the lift rod to the turnbuckle and
secure with jam nut (Fig. 0432).
Fig. 0432 DSCN-1462a
To Next Page
Loading...
