Toro GrandStand Series - Page 137

CHASSIS
3-116 Toro GrandStand Service Manual
3
92. Repeat steps 87 through 91 on the other side of the
machine.
93. Secure the lower ends of the lift links using the
shoulder bolts, washers and nuts (Fig. 0437).
Fig. 0437 DSCN-1467a
Note: Install the thin washer between the lift link
and deck bracket (Fig. 0438).
Fig. 0438 DSCN-1469a
94. Hook the “Z” bend of the throttle cable into the
throttle control lever and loosely clamp the outer
housing of the throttle cable with the cable clamp
(Fig. 0439).
Fig. 0439 IMG-0575a
95. Move the throttle lever to the “Fast” position (Fig.
0440).
Fig. 0440 DSCN-1478a