CHASSIS
3-120 Toro GrandStand Service Manual
3
104. Replace the tting o-rings. Install the high-
pressure hoses to the pumps in their original
positions (Fig. 0452).
Fig. 0452 DSCN-0810a
105. Secure the hose routings using three cable ties
(Fig. 0453).
Fig. 0453 DSCN-0689a
106. Secure the fuel hose to the fuel lter using the
hose clamp (Fig. 0454).
Fig. 0454 DSCN-1484a
107. 2009 only: Install the lift assist cylinder. See “Lift
Assist Cylinder Installation (2009 only)” on page
3-43.
108. 2010 only: Position the chain between the pivot
shaft and extension spring assembly (Fig. 0455).
Fig. 0455 DSCN-0815a
To Next Page
Loading...
