CHASSIS
3-135Toro GrandStand Service Manual
3
46. Remove bolt and nut securing the “R” clamp (secur-
ing choke and throttle cables) to the LH side of the
carrier frame (Fig. 0510).
Fig. 0510 DSCN-1249a
47. Remove the cable tie securing the choke cable to
the LH rear side of the carrier frame (Fig. 0511).
Fig. 0511 DSCN-1251a
48. Remove the hairpin cotter and clevis pin securing
the brake rod yoke to the brake assembly (Fig.
0512).
Fig. 0512 DSCN-1254a
49. Remove the two sets (one set per side) of carriage
bolts, washers and nuts securing the platform and
brake assemblies to the carrier frame (Fig. 0513).
Fig. 0513 DSCN-1257a
To Next Page
Loading...
