CHASSIS
3-134 Toro GrandStand Service Manual
3
42. Remove the four sets of bolts, spacers and nuts
(two sets per side) that secure the axle and wheel
assembly to the carrier frame (Fig. 0506).
Fig. 0506 DSCN-1019a
43. Using two people or a hoist, lift the rear end of the
carrier frame and tower assembly (Fig. 0507).
Fig. 0507 DSCN-1024a
44. Walk the carrier frame and tower assembly forward,
over the engine and deck assembly (Fig. 0508).
Fig. 0508 DSCN-1028a
45. Remove the nut and bolt securing the fuel hose
bracket (securing the fuel hose) to the RH side of the
carrier frame (Fig. 0509).
Note: 2009 models use an “R” clamp to secure the
position of the fuel hose.
Fig. 0509 DSCN-1247a
To Next Page
Loading...
