Toro GrandStand Series - Page 154

CHASSIS
3-133Toro GrandStand Service Manual
3
38. Remove the two cable ties securing the speed
control cable to the RH control cable and the lower
LH side of the linkage mount (Fig. 0502).
Fig. 0502 DSCN-1000a
39. Remove the motion control cables from the linkage
mount (Fig. 0503).
Fig. 0503 DSCN-1005a
40. Remove the speed control cable clip from the speed
control handle assembly (Fig. 0504).
Fig. 0504 DSCN-1010a
41. Remove the “Z” bend of the speed control cable
from the speed control handle assembly (Fig. 0505).
Fig. 0505 DSCN-1015a