Toro GrandStand Series - Page 160

CHASSIS
3-139Toro GrandStand Service Manual
3
61. Remove the lift assembly from the carrier frame (Fig.
0526).
Fig. 0526 DSCN-1294a
Note: Ensure the thin washer is removed with the
lift assembly (Fig. 0527).
Fig. 0527 DSCN-1308a
62. Repeat step 60 and 61 on the other side of the
carrier frame.
63. Remove the grease zerk from the LH & RH rear
pivot hubs (Fig. 0528).
Fig. 0528 DSCN-1297a
64. Remove the grease zerk from the LH & RH front
pivot hubs (Fig. 0529).
Fig. 0529 DSCN-1300a