Toro GrandStand Series - Page 164

CHASSIS
3-143Toro GrandStand Service Manual
3
10. Position the two spacers between the hydraulic
reservoir and the hydraulic reservoir mount (Fig.
0540).
Fig. 0540 DSCN-1314a
11. Secure the hydraulic reservoir and spacers to the
hydraulic reservoir mount using two bolts, washers
and nuts (Fig. 0541).
Fig. 0541 DSCN-1316a
12. Secure the low-pressure suction line to the hydraulic
lter inlet tting using the hose clamp (Fig. 0542).
Fig. 0542 DSCN-1321a
13. Secure the “R” clamp (securing the low-pressure
return line) to the hydraulic reservoir mount using the
bolt and nut (Fig. 0543).
Note: The tabs of the “R” clamp straddle the
hydraulic reservoir mount.
Fig. 0543 DSCN-1323a