Toro GrandStand Series - Page 182

CHASSIS
3-161Toro GrandStand Service Manual
3
75. Push the choke knob in so it is in the “Open” position
(Fig. 0608).
Fig. 0608 DSCN-1479a
76. While holding the engine choke control lever in the
“Open” position, pull the slack from the cable jacket
and tighten the choke cable clamp (Fig. 0609).
Fig. 0609 IMG-1655a
77. Position the mufer guard assembly and loosely
install the four carriage bolts, two guard mounting
brackets and nuts (Fig. 0610).
Fig. 0610 IMG-0586a
Note: 60” models have guard panel, not the two
guard mounting brackets (Fig. 0611).
Fig. 0611 DSCN-1471a