Toro GrandStand Series - Page 183

CHASSIS
3-162 Toro GrandStand Service Manual
3
78. Make sure the mufer exhaust pipe is centered in
the mufer guard assembly, then tighten all four
bolts and nuts (Fig. 0612).
Fig. 0612 IMG-0589a
79. Secure the low-pressure suction line to the “T” tting
using the hose clamp (Fig. 0613).
Fig. 0613 DSCN-1473a
Note: The opposite end of the low-pressure suction
line is connected to the hydraulic oil lter
(Fig. 0614).
Fig. 0614 DSCN-1475a