Toro GrandStand Series - Page 195

CONTROLS
4-8 Toro GrandStand Service Manual
4
3. Secure the RH control lever to the motion control
assembly with the shoulder bolt and nut (Fig. 0656).
5. Install the extension spring to the motion control
assembly (Fig. 0658).
Fig. 0656 IMG-0996a
4. Loosely secure the OPC switch to the motion control
assembly (Fig. 0657).
Note: These will be tightened later in the process.
Fig. 0657 IMG-0989a
Fig. 0658 IMG-0987a
6. Install the pivot rod into the motion control assembly
(Fig. 0659).
Fig. 0659 IMG-0986a