Toro GrandStand Series - Page 23

CHASSIS
3-2 Toro GrandStand Service Manual
3
4. Remove the hairpin cotter from the top end of the
parking brake rod. Slide the top end of the rod out of
the handle (Fig. 0004).
Fig. 0004 IMG-9347a
Note: 2010 models use a nut to secure the upper
end of the parking brake rod (Fig. 0005).
Fig. 0005 DSCN-0261a
5. Remove the hairpin cotter and clevis pin securing
the top and bottom brake arms to the brake lever
(Fig. 0006).
Fig. 0006 DSCN-0268a
6. Disconnect the wire harness from the brake switch
(Fig. 0007).
Fig. 0007 DSCN-0265a