Toro GrandStand Series - Chassis; Parking Brake Assembly Replacement

CHASSIS
3-1Toro GrandStand Service Manual
3
Parking Brake Assembly
Replacement
Parking Brake Assembly Removal
1. Move the parking brake lever to the “OFF” position
(Fig. 0001).
Fig. 0001 IMG-1302a
2. Remove the hairpin cotter and clevis pin securing
the linkage yoke at the lower end of the brake rod to
the brake assembly (Fig. 0002).
Fig. 0002 DSCN-0264a
3. Move the parking brake lever to the “ON” position
(Fig. 0003).
Fig. 0003 IMG-1310a