Toro GrandStand Series - Throttle Cable Replacement

CONTROLS
4-50 Toro GrandStand Service Manual
4
12. Ensure the choke is functioning correctly by moving
the choke knob in and out while observing the choke
plate in the carburetor throat.
11. Secure the position of the choke cable with the
screw and cable clamp (Fig. 0817).
Fig. 0817 IMG-1127a
Throttle Cable Replacement
Throttle Cable Removal
1. Remove the bolt and cable clamp securing the
throttle cable to the engine throttle plate (Fig. 0818).
Fig. 0818 IMG-1127a
2. Remove the “Z” bend of the throttle cable from the
engine throttle arm (Fig. 0819).
Fig. 0819 IMG-1154a