CHASSIS
3-4 Toro GrandStand Service Manual
3
Parking Brake Assembly Installation
1. Secure the LH side of the brake assembly to the
chassis using the shoulder bolt, thick washer and nut
(Fig. 0011).
Fig. 0011 IMG-1325a
2. Place the small spacer onto the bolt that secures the
RH side of the brake assembly (Fig. 0012).
Fig. 0012 IMG-1329a
3. Position the bolt and spacer through the chassis
mount and brake assembly. The spacer must be
nested in the chassis mount (Fig. 0013).
Fig. 0013 IMG-1332a
4. Position the large spacer onto the bolt (Fig. 0014).
Fig. 0014 IMG-1334a
To Next Page
Loading...
