HYDRAULIC DRIVE SYSTEM
6-13Toro GrandStand Service Manual
6
19. 2010 only: Remove the four self-tapping screws
securing the tank bracket to the control tower (Fig.
0944).
Fig. 0944 IMG-0897a
20. Position the deck height adjustment to 1” (2.54cm)
(Fig. 0945).
Fig. 0945 IMG-9306a
21. Remove the fuel tank from the machine (Fig. 0946).
Fig. 0946 IMG-9307a
22. Remove the 3 push cable ties by driving them
through the tower frame (Fig. 0947).
Fig. 0947 IMG-9314a
To Next Page
Loading...
