Toro GrandStand Series - Page 273

HYDRAULIC DRIVE SYSTEM
6-14 Toro GrandStand Service Manual
6
23. Loosen the bolt and nut securing the strike plate to
the tower two full turns to gain access to the bolt
below it (Fig. 0948).
Fig. 0948 IMG-9316a
24. Remove the bolt and nut securing the fuel line
r-clamp to the frame (Fig. 0949).
Fig. 0949 IMG-9329a
25. Raise the deck to the transport position and secure
the deck in position with straps (Fig. 0950).
Fig. 0950 IMG-9339a
26. Raise and support the machine.
27. 2009 only: Remove the lock nut from the lower end
of the lift bar (Fig. 0951).
Fig. 0951 IMG-9344a