HYDRAULIC DRIVE SYSTEM
6-42 Toro GrandStand Service Manual
6
30. Remove the hairpin cotter from the top end of the
parking brake rod. Slide the top end of the rod out of
the handle (Fig. 1053).
Fig. 1053 IMG-9347a
31. Remove the nuts from the 4 self-tapping screws
securing the tower to the frame (Fig. 1055).
Fig. 1055 IMG-9516a
32. Remove the 4 self-tapping screws securing the
tower to the frame (Fig. 1056).
Fig. 1056 IMG-9516a
Note: 2010 models use a nut to secure the upper
end of the parking brake rod (Fig. 1054).
Fig. 1054 DSCN-0261a
To Next Page
Loading...
