Toro GrandStand Series - Page 319

HYDRAULIC DRIVE SYSTEM
6-60 Toro GrandStand Service Manual
6
45. Slide the right hand pump pulley onto pump shaft
(Fig. 1122).
Fig. 1122 IMG-9540a
46. Apply thread locking compound to the 2 pump pulley
set screws (Fig. 1123).
Fig. 1123 IMG-9467a
47. Install the 2 pump pulley set screws (Fig. 1124).
Fig. 1124 IMG-9475a
48. Route the pump belt around the pump pulleys (Fig.
1125).
Fig. 1125 IMG-9543a