Toro GrandStand Series - Page 332

HYDRAULIC DRIVE SYSTEM
6-73Toro GrandStand Service Manual
6
13. Install the wheel hub onto the wheel motor shaft
(Fig. 1168).
Fig. 1168 IMG-0008a
14. Apply thread locking compound to the threads on the
wheel motor shaft (Fig. 1169).
Fig. 1169 IMG-0009a
15. Loosely install a wheel motor nut (Fig. 1170).
Fig. 1170 IMG-0013a
16. Slide the wheel onto the wheel hub (Fig. 1171).
Fig. 1171 IMG-9919a