Toro GrandStand Series - Page 343

HYDRAULIC DRIVE SYSTEM
6-84 Toro GrandStand Service Manual
6
4. Move the hose clamp from the lter tting so the
hose can be removed (Fig. 1208).
Note: Due to the short length, remove the hose from
the lter tting as the tank is removed.
Fig. 1208 IMG-0832a
6. While lifting the tank from the bracket, slide the
suction line off the lter tting (Fig. 1210).
Fig. 1210 IMG-0836a
7. Remove the hydraulic lter (Fig. 1211).
Fig. 1211 IMG-0856a
5. Remove the two sets of bolts, nuts, washers and
spacers securing the reservoir tank to the tank
bracket (Fig. 1209).
Fig. 1209 IMG-0834a