Toro GrandStand Series - Page 344

HYDRAULIC DRIVE SYSTEM
6-85Toro GrandStand Service Manual
6
8. Move the hose clamp from the lter mount tting so
the hose can be removed (Fig. 1212).
Fig. 1212 IMG-0857a
9. Remove the low pressure suction line from the lter
mount tting (Fig. 1213).
Fig. 1213 IMG-0859a
10. Remove the two bolts and washers securing the
lter mount to the tank bracket (Fig. 1214).
Fig. 1214 IMG-0879a
11. Loosen the jam nuts securing the position of the 90
degree ttings (Fig. 1215).
Fig. 1215 IMG-0864a