Toro GrandStand Series - Page 349

HYDRAULIC DRIVE SYSTEM
6-90 Toro GrandStand Service Manual
6
15. Install the low pressure return line to the 45 degree
tting and secure with the hose clamp (Fig. 1232).
18. Bleed the hydraulic system. See “Bleeding the
Hydraulic System” on page 6-95.
17. Fill the reservoir to the “COLD” uid level (Fig.
1234).
Fig. 1232 IMG-0892a
16. Secure the hose to the reservoir bracket using the
“R” clamp, bolt, washer and nut (Fig. 1233).
Fig. 1233 IMG-0821a
Fig. 1234 g. 68 G001045
A. Cap C. Cold uid level-full
B. Bafe D. Hot uid level-full
A
B
D
C