Toro GrandStand Series - Page 348

HYDRAULIC DRIVE SYSTEM
6-89Toro GrandStand Service Manual
6
11. Position the reservoir into the reservoir bracket.
While lowering the reservoir into place, install the
low pressure hose onto the lter mount bracket
tting (Fig. 1228).
13. Position the two spacers between the reservoir
mounting surface and the reservoir bracket (Fig.
1230).
Fig. 1228 IMG-0836a
12. Secure the hose to the tting with the hose clamp
(Fig. 1229).
Fig. 1229 IMG-0832a
Fig. 1230 IMG-0891a
14. Secure the reservoir assembly to the reservoir
bracket using two sets of screws, washers and nuts
(Fig. 1231).
Fig. 1231 IMG-0834a