Toro GrandStand Series - Page 347

HYDRAULIC DRIVE SYSTEM
6-88 Toro GrandStand Service Manual
6
7. Secure the lter mount to the hydraulic reservoir
using two bolts and washers (Fig. 1224).
9. Apply a thin layer of oil to the lter’s rubber seal (Fig.
1226).
Fig. 1224 IMG-0879a
8. Install the low pressure suction hose to the lter
mount tting and secure with hose clamp (Fig.
1225).
Fig. 1225 IMG-0857a
Fig. 1226 IMG-0881a
10. Install the oil lter to the lter mount (Fig. 1227).
Fig. 1227 IMG-0882a