Toro GrandStand Series - Mower Deck; Mower Deck Belt Replacement

MOWER DECK
7-1Toro GrandStand Service Manual
7
Mower Deck Belt Replacement
Mower Deck Belt Removal
Mower Deck Belt Installation
1. Install the deck drive belt. Ensure the deck drive belt
is routed properly around the mower deck and clutch
pulleys. Refer to belt routing decal 117-0486 (Fig.
1246).
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1” (25mm) HOC.
3. Remove the RH and LH belt covers (Fig. 1244).
Fig. 1244 IMG-0485a
4. With a spring tool, remove the extension spring from
the spring anchor bracket (Fig. 1245).
Fig. 1245 IMG-0487a
Fig. 1246 g. 1 117-0486
2. With a spring tool, install the extension spring to the
spring anchor bracket (Fig. 1247).
Fig. 1247 IMG-0487a
5. Remove the belt from around the pulleys.