MOWER DECK
7-8 Toro GrandStand Service Manual
7
Note: 2010 machines have the spindle housing
mounted to the top of the deck. From the
underside of the deck, remove the 6 nuts
securing the spindle housing (Fig. 1269).
Fig. 1269 IMG-0794a
24. Remove the 6 bolts and nuts securing the spindle
housing to the mower deck (Fig. 1268).
Fig. 1268 IMG-9780a
25. Remove the spindle assembly from the mower deck
(Fig. 1270).
Fig. 1270 IMG-9816a
26. To service the spindle, refer to “Spindle Service” on
page 7-14.
To Next Page
Loading...
