Toro GrandStand Series - Page 38

CHASSIS
3-17Toro GrandStand Service Manual
3
Caster Wheel Assembly Replacement
Caster Wheel Assembly Removal
1. Remove the grease cap from the top of the caster
wheel pivot tube (Fig. 0060).
3. Remove the caster fork and wheel assembly.
4. Remove the three Bellville washers from the caster
wheel pivot tube (Fig. 0062).
Fig. 0060 DSCN-0357a
Fig. 0062 DSCN-0362a
5. Remove the upper tapered roller bearing from the
caster wheel pivot tube (Fig. 0063).
Fig. 0063 DSCN-0364a
2. Remove the nut from the caster fork shaft (Fig.
0061).
Fig. 0061 DSCN-0359a