Toro GrandStand Series - Page 39

CHASSIS
3-18 Toro GrandStand Service Manual
3
6. Remove the grease seal from the bottom of the
caster wheel pivot tube (Fig. 0064).
8. If replacing the wheel bearings, use a blunt punch to
remove the upper and lower bearing cups from the
caster wheel pivot tube (Fig. 0066).
Fig. 0064 DSCN-0370a
7. Remove the lower tapered roller bearing (Fig. 0065).
Fig. 0065 DSCN-0416a
Fig. 0066 DSCN-0392a
9. Remove the nut securing the caster wheel axle bolt,
then remove the axle bolt (Fig. 0067).
Fig. 0067 DSCN-0376a