Toro GrandStand Series - Page 395

MOWER DECK
7-40 Toro GrandStand Service Manual
7
Early 2009 Belt Cover Bracket Installation
3. Remove the self-tapping screw securing the belt
cover bracket to the deck (Fig. 1387).
1. Position the belt cover bracket on the deck so the
dimple on the deck is aligned with the dimple on the
bracket (Fig. 1388).
Fig. 1387 IMG-0718a
Fig. 1388 IMG-0717a
2. Secure the bracket to the deck using a self-tapping
screw (Fig. 1389).
Fig. 1389 IMG-0718a