Toro GrandStand Series - Page 397

MOWER DECK
7-42 Toro GrandStand Service Manual
7
Mid 2009 & Later Belt Cover Brackets
Installation
3. From the underside of the deck, remove the two
nuts securing the wire form bracket to the deck, then
remove the wire form bracket (Fig. 1394).
1. Position the wire form bracket through the holes in
the top of the deck (Fig. 1395).
Fig. 1394 IMG-0722a
Fig. 1395 IMG-0724a
2. Using two nuts, secure the wire form bracket to the
deck (Fig. 1396).
Fig. 1396 IMG-0722a