Toro GrandStand Series - Page 400

MOWER DECK
7-45Toro GrandStand Service Manual
7
Grass Deector Installation
1. Insert the four carriage bolts into the discharge strap
(Fig. 1404).
Note: The bolt pattern is oriented so that the two
bolt holes that are closer to each other are on
the left.
3. Secure the front hinge bracket to the assembly using
two nuts (Fig. 1406).
Fig. 1404 IMG-0755a
2. Position and press the rubber deector onto the four
carriage bolts (Fig. 1405).
Fig. 1405 IMG-0759a
Fig. 1406 IMG-0762a
4. Secure the rear hinge bracket to the assembly using
two nuts (Fig. 1407).
Fig. 1407 IMG-0763