Toro GrandStand Series - Mower Deck Replacement

MOWER DECK
7-47Toro GrandStand Service Manual
7
Mower Deck Replacement
Mower Deck Removal
1. Remove the mower deck belt. Refer to “Mower Deck
Belt Removal” on page 7-1.
2. Use a strap to secure the engine base to the frame
on both sides (Fig. 1412).
4. Remove the four bolts and nuts securing the engine
base to the rear of the deck (Fig. 1414).
Note: The rear of the deck is now free from the
engine base and can be lowered to the
ground.
Fig. 1412 IMG-0772a
3. Remove the bolt and nut securing the front of the
engine base to the deck (Fig. 1413).
Fig. 1413 IMG-0773a
Fig. 1414 IMG-0781a
5. Remove the shoulder bolt, washer and nut securing
one of the front lift links to the mower deck (Fig.
1415).
Fig. 1415 IMG-0782a