Toro GrandStand Series - Page 434

ELECTRICAL
8-25Toro GrandStand Service Manual
8
9. Apply anti-seize to the crankshaft (Fig. 1501).
Fig. 1501 IMG-9627a
10. Slide the clutch onto the crankshaft aligning the key-
way with the key in the crankshaft (Fig. 1502).
Fig. 1502 IMG-9614a
Note: On 2010 models, the clutch stop bracket must
be nested in the slot on the clutch (Fig. 1503).
Fig. 1503 DSCN-1157a