Toro GrandStand Series - Page 435

ELECTRICAL
8-26 Toro GrandStand Service Manual
8
11. Install the spring washer (crown toward the bolt
head) and at washer to the clutch bolt (Fig. 1504).
Fig. 1504 IMG-9630a
12. Apply thread-locking compound to the threads of the
clutch bolt (Fig. 1505).
Fig. 1505 PICT-8700a
14. Install the bolt, washers, spacer and nut securing the
clutch brake strap to the mower deck (Fig. 1507).
A. Bolt D. Spacer
B. Washers (2) E. Washer
C. Clutch strap F. Nut
Fig. 1507 IMG-9624a
13. Torque the clutch bolt to 55 ft-lbs. (75 Nm) (Fig.
1506).
Fig. 1506 IMG-9645a
A
B B
D
E
F
C