Toro GrandStand Series - Page 437

ELECTRICAL
8-28 Toro GrandStand Service Manual
8
19. Install 3 of the 4 lower bolts securing the mower
deck to the engine base. Remove the screwdriver
(Fig. 1512).
21. Install the upper bolt securing the engine base to the
mower deck (Fig. 1514).
Fig. 1512 IMG-9651a
20. Install the remaining (4th) bolt (Fig. 1513).
Fig. 1513 IMG-9608a
Fig. 1514 IMG-9605a
22. Install the nuts on the 5 bolts securing the mower
deck to the engine base (Fig. 1515).
Fig. 1515 IMG-9604a