Toro GrandStand Series - Page 44

CHASSIS
3-23Toro GrandStand Service Manual
3
11. Pack the pivot tube tapered roller bearings with high
temperature grease (Fig. 0083).
13. Install grease seal into the base of the pivot tube
(Fig. 0085).
Fig. 0083 DSCN-0407a
12. Install the lower bearing into the pivot tube (Fig.
0084).
Fig. 0084 DSCN-0416a
Fig. 0085 DSCN-0414a
14. Install the upper bearing into the pivot tube (Fig.
0086).
Fig. 0086 DSCN-0418a