Toro GrandStand Series - Page 45

CHASSIS
3-24 Toro GrandStand Service Manual
3
15. Install the 3 Bellville washers into the pivot tube (Fig.
0087).
16. Insert the caster wheel and fork assembly through
the pivot hub (Fig. 0089).
Fig. 0087 DSCN-0428a
Note: Bottom: Crown Up / Middle: Crown Down /
Top: Crown up (Fig. 0088).
Fig. 0088 DSCN-0423a
Fig. 0089 DSCN-0431a
17. Secure the caster wheel and fork assembly with the
nut (Fig. 0090).
Fig. 0090 DSCN-0360a