Toro GrandStand Series - Page 64

CHASSIS
3-43Toro GrandStand Service Manual
3
Lift Assist Cylinder Installation (2009 only)
1. Ensure both retaining clips are in the position shown
(Fig. 0159) and (Fig. 0160).
2. Install the large cylinder end of the gas spring as-
sembly onto the rear ball stud by pressing the gas
spring socket onto the ball stud until it is secured by
the spring clip (Fig. 0161).
Fig. 0159 IMG-9718a
Fig. 0160 IMG-9720a
Fig. 0161 IMG-9724a
3. Repeat step 2 on the other side if replacing both gas
spring assemblies.
4. Raise the mower deck to the transport position (Fig.
0162).
Fig. 0162 IMG-0080a