CHASSIS
3-46 Toro GrandStand Service Manual
3
Lift Assist Spring Replacement (2010
only)
Lift Assist Spring Removal (2010 only)
13. Turn the upper nut on the lift bar assembly down to
the height-of-cut pin (Fig. 0171).
1. Move the height of cut (HOC) lever to the transport
position (Fig. 0173).
Fig. 0171 IMG-9705
14. Tighten the lower nut on the lift bar assembly to
secure the HOC adjustment (Fig. 0172).
Fig. 0172 IMG-9705
Fig. 0173 DSCN-0441a
2. Support the deck with a oor jack (Fig. 0174).
Fig. 0174 DSCN-0442a
To Next Page
Loading...
