Toro GrandStand Series - Page 69

CHASSIS
3-48 Toro GrandStand Service Manual
3
Lift Assist Springs Installation (2010 only)
4. Move the HOC lever to the transport position, then
remove the oor jack.
A. 1-1/2” (3.8cm) for 60” decks
2” (5cm) for 48” for 52” decks
1. Position the chain between the spring hook and pivot
shaft assembly (Fig. 0178).
3. Install the bolt until the gap between the control
tower mount and spring cap is 1-1/2” (3.8cm) for 60”
decks / 2” (5cm) 48” or 52” decks (Fig. 0180).
Fig. 0178 DSCN-0453a
2. Secure the spring and chain assembly to the control
tower using the bolt and washer (Fig. 0179).
Fig. 0179 DSCN-0455a
Fig. 0180 DSCN-1527a
A