Toro GrandStand Series - Page 72

CHASSIS
3-51Toro GrandStand Service Manual
3
9. Remove the woodruff key from both of the wheel
motor shafts (Fig. 0188).
12. Position a drain pan under the wheel motor (Fig.
0190).
Fig. 0188 DSCN-0628a
10. Thoroughly clean the area around the hydraulic
ttings to prevent debris from entering the system.
11. Mark the hoses, corresponding ttings, and motor
ports to ensure the hoses are reconnected in their
original positions (Fig. 0189).
Fig. 0189 DSCN-0631a
Fig. 0190 DSCN-0634a
13. Disconnect both hydraulic hoses from the wheel
motor ttings (Fig. 0191).
Fig. 0191 DSCN-0636a